0
Ürün Kodu
SD.M.109137.2500
Ürün Markası
Sepete Ekle

MERCK 109137.2500 Sodium Hydroxide Solution C(Naoh) = 1 Mol/L (1 N) UN1824 8, II CAS No.1310-73-2

Description
Catalogue Number109137
Product Information
CAS number1310-73-2
GradeReag. Ph Eur,Reag. USP
HS Code2815 12 00
Quality LevelMQ200
Physicochemical Information
Density1.04 g/cm3 (20 °C)
pH value13.7 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Statement(s)H290: May be corrosive to metals.H314: Causes severe skin burns and eye damage.
Precautionary Statement(s)P234: Keep only in original packaging.P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P363: Wash contaminated clothing before reuse.
Signal WordDanger
Storage class8B Non-combustible, corrosive hazardous materials
WGKWGK 1 slightly hazardous to water
Disposal13Bases and alcoholates should be diluted if necessary by carefully stirring them into water and then neutralized (protective gloves, fume cupboard!) with hydrochloric acid (Cat. No. 100312). Before placing in container D, check the pH with pH universal indicator strips (Cat. No. 109535).
Safety Information
Categories of dangercorrosive
Storage and Shipping Information
StorageStore at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RIDUN 1824, 8, II
Declaration (transport by air) IATA-DGRUN 1824, 8, II
Declaration (transport by sea) IMDG-CodeUN 1824, 8, II, Segregation Group: 18 (Alkalis)
Specifications
Formliquid
Amount-of-substance concentration0.995 - 1.005 mol/l
Measurement uncertainty+/- 0.003
TraceabilityNIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.The concentration is determined by volumetric titration and refers to 20°C.The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Global Trade Item Number
Catalogue NumberGTIN
109137100004022536110950
109137100304054839633379
109137250004022536110974
109137400004027269029784
109137400304054839633386
109137901004022536110981
109137902504022536111001