0
Ürün Kodu
SD.M.109112.1000
Ürün Markası
Sepete Ekle
MERCK 109112.1000 Potassium Hydroxide Solution 1 mol/L (1N) TitriPUR®

Description
Catalogue Number109112
Product Information
CAS number1310-58-3
GradeReag. Ph Eur
HS Code2815 20 00
Quality LevelMQ200
Physicochemical Information
Boiling point100 °C (1013 hPa)
Density1.00 g/cm3 (20 °C)
pH value13 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)H290: May be corrosive to metals.H315: Causes skin irritation.H319: Causes serious eye irritation.
Precautionary Statement(s)P234: Keep only in original packaging.P264: Wash skin thoroughly after handling.P280: Wear protective gloves/ eye protection/ face protection.P302 + P352: IF ON SKIN: Wash with plenty of water.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P332 + P313: If skin irritation occurs: Get medical advice/ attention.
Signal WordWarning
Storage class8B Non-combustible, corrosive hazardous materials
WGKNWG not water endangering
Disposal28Aqueous solutions: Container D.
Safety Information
Categories of dangerirritant
Storage and Shipping Information
StorageStore at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RIDUN 1814, 8, III
Declaration (transport by air) IATA-DGRUN 1814, 8, III
Declaration (transport by sea) IMDG-CodeUN 1814, 8, III, Segregation Group: 18 (Alkalis)
Specifications
Formliquid
Amount-of-substance concentration0.0995 - 0.1005 mol/l
Measurement uncertainty+/- 0.0003
TraceabilityNIST SRM
The amount-of-substance concentration of this volumetric solution is analyzed by our quality control laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025.The concentration is determined by volumetric titration and refers to 20°C.The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Global Trade Item Number
Catalogue NumberGTIN
109112100004022536110714
109112100304054839999598