| Safety Information according to GHS |
|---|
| Hazard Pictogram(s) | |
| Hazard Statement(s) | H272: May intensify fire; oxidizer.H290: May be corrosive to metals.H314: Causes severe skin burns and eye damage.H360D: May damage the unborn child.H410: Very toxic to aquatic life with long lasting effects. |
| Precautionary Statement(s) | P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P260: Do not breathe dust.P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Signal Word | Danger |
| RTECS | VW4725000 |
| Storage class | 5.1B Oxidizing hazardous materials |
| WGK | WGK 3 highly hazardous to water |
| Disposal | 27Residues containing valuable recoverable metals should be forwarded for recycling. Container H. |
| Specifications |
|---|
| Assay (argentometric) | 99.0 - 100.5 % |
| Assay (argentometric; calculated on dried substance) | 98.0 - 102.0 % |
| Appearance of solution | passes test |
| Identity | passes test |
| Acidity or alkalinity | passes test |
| Copper and substances precipitated by NH₃ (Al, Bi, Cu, Pb) | passes test |
| Substances not precipitated by hydrochloric acid | ≤ 0.3 % |
| Loss on drying (Silica gel) | ≤ 0.05 % |
| Meets analytical specifications of Ph Eur,USP.The information provided does not imply the suitability of the product for any particular application. It is customer’s sole responsibility, prior to use, to determine that the product is suitable and permitted for the customer’s intended use and application. |
| Residual solvents (ICH Q3C) | excluded by production process |
| Loss on drying (Silica gel) | ≤ 0.05 % |
| Meets analytical specifications of Ph Eur,USP.The information provided does not imply the suitability of the product for any particular application. It is customer’s sole responsibility, prior to use, to determine that the product is suitable and permitted for the customer’s intended use and application.Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*). |
