MERCK 100519.2500 Perchloric Acid 70-72% Gr For Analysis Acs,Iso,Reag. Ph Eur UN1873 5.1 (8)
| Description |
|---|
| Catalogue Number | 100519 |
| Product Information |
|---|
| Grade | ACS,ISO,Reag. Ph Eur |
| HS Code | 2811 19 30 |
| Quality Level | MQ300 |
| Physicochemical Information |
|---|
| Boiling point | 198.7 °C (1013 hPa) |
| Density | 1.68 g/cm3 (20 °C) |
| Melting Point | -18 °C |
| Safety Information according to GHS |
|---|
| Hazard Statement(s) | H271: May cause fire or explosion; strong oxidizer.H290: May be corrosive to metals.H302: Harmful if swallowed.H314: Causes severe skin burns and eye damage.H373: May cause damage to organs through prolonged or repeated exposure. |
| Precautionary Statement(s) | P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P314: Get medical advice/ attention if you feel unwell. |
| Signal Word | Danger |
| Storage class | 5.1A Strongly oxidizing hazardous materials |
| WGK | WGK 1 slightly hazardous to water |
| Disposal | 22Inorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I. |
| Safety Information |
|---|
| Categories of danger | oxidizing, corrosive |
| Storage and Shipping Information |
|---|
| Storage | Store at +15°C to +25°C. |
| Transport Information |
|---|
| Declaration (railroad and road) ADR, RID | UN 1873, 5.1 (8), I |
| Declaration (transport by air) IATA-DGR | UN 1873, 5.1 (8), I |
| Declaration (transport by sea) IMDG-Code | UN 1873, 5.1 (8), I, Segregation Group: 1 (Acids) |
| Specifications |
|---|
| Assay (acidimetric) | 70.0 - 72.0 % |
| Identity | passes test |
| Density (d 20/20) | approx. 1.7 |
| Color | ≤ 10 Hazen |
| Chlorate (ClO₃) | ≤ 10 ppm |
| Chloride (Cl) | ≤ 3 ppm |
| Free chlorine (Cl) | ≤ 0.5 ppm |
| Phosphate and Silicate (as SiO₂) | ≤ 5 ppm |
| Sulfate (SO₄) | ≤ 10 ppm |
| Total nitrogen (N) | ≤ 10 ppm |
| Heavy metals (as Pb) | ≤ 1 ppm |
| Ag (Silver) | ≤ 0.1 ppm |
| Al (Aluminium) | ≤ 0.05 ppm |
| As (Arsenic) | ≤ 0.05 ppm |
| Ba (Barium) | ≤ 0.02 ppm |
| Be (Beryllium) | ≤ 0.02 ppm |
| Bi (Bismuth) | ≤ 0.1 ppm |
| Ca (Calcium) | ≤ 0.5 ppm |
| Cd (Cadmium) | ≤ 0.05 ppm |
| Co (Cobalt) | ≤ 0.05 ppm |
| Cu (Copper) | ≤ 0.1 ppm |
| Fe (Iron) | ≤ 1.0 ppm |
| Ge (Germanium) | ≤ 0.05 ppm |
| K (Potassium) | ≤ 0.1 ppm |
| Li (Lithium) | ≤ 0.02 ppm |
| Mg (Magnesium) | ≤ 0.5 ppm |
| Mn (Manganese) | ≤ 0.02 ppm |
| Mo (Molybdenum) | ≤ 0.05 ppm |
| Na (Sodium) | ≤ 0.5 ppm |
| Ni (Nickel) | ≤ 0.1 ppm |
| Pb (Lead) | ≤ 0.05 ppm |
| Sr (Strontium) | ≤ 0.02 ppm |
| Ti (Titanium) | ≤ 0.1 ppm |
| Tl (Thallium) | ≤ 0.05 ppm |
| V (Vanadium) | ≤ 0.05 ppm |
| Zn (Zinc) | ≤ 0.1 ppm |
| Zr (Zirconium) | ≤ 0.1 ppm |
| Residue on ignition (as sulfate) | ≤ 0.003 % |
| conforms to ACS, ISO, Reag. Ph Eur |
| Global Trade Item Number |
|---|
| Catalogue Number | GTIN |
|---|
| 1005190510 | 04054839164170 |
| 1005191001 | 04022536581637 |
| 1005191010 | 04054839164163 |
| 1005191016 | 04022536899749 |
| 1005192501 | 04022536581644 |
| 1005192510 | 04027269218164 |
| 1005192514 | 04022536899756 |
