| Safety Information according to GHS |
|---|
| Hazard Pictogram(s) | |
| Hazard Statement(s) | H226: Flammable liquid and vapour.H302: Harmful if swallowed.H314: Causes severe skin burns and eye damage.H331: Toxic if inhaled.EUH071: Corrosive to the respiratory tract. |
| Precautionary Statement(s) | P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| Signal Word | Danger |
| RTECS | LQ4900000 |
| Storage class | 3 Flammable liquids |
| WGK | WGK 1 slightly hazardous to water |
| Disposal | 4Liquid organic acids or solutions should be diluted, if necessary, and carefully neutralized with sodium hydrogen carbonate (Cat. No. 106323) or with sodium hydroxide (Cat. No 106462). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). |
| Specifications |
|---|
| Assay (alkalimetric) | 98.0 - 100.5 % |
| Identity | passes test |
| Identity (IR-spectrum) | passes test |
| Appearance | passes test |
| Appearance of solution | passes test |
| Relative density (d 20/20) | 1.217 - 1.223 |
| Chromat. purity (Acetic acid/Impurity A) | ≤ 0.10 % |
| Chromatographic purity (other impurity) | ≤ 0.10 % |
| Chromatographic purity (Sum of all other impurities) | ≤ 0.3 % |
| Chloride (Cl) | ≤ 0.0010 % |
| Sulfate (SO₄) | ≤ 0.004 % |
| Sulfite (SO₃) | ≤ 0.002 % |
| As (Arsenic) | ≤ 0.0003 % |
| Cu (Copper) | ≤ 0.002 % |
| Pb (Lead) | ≤ 0.001 % |
| Zn (Zinc) | ≤ 0.002 % |
| Formaldehyde (HCHO) | ≤ 0.1 % |
| Oxalic acid (C₂H₂O₄) | ≤ 0.01 % |
| Residual solvents (ICHQ3C) of class 2 (Methanol) | ≤ 0.3 % |
| Evaporation residue | ≤ 0.005 % |
| Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*). |
| Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*). |
