Key Spec Table
| CAS # | EC Number | Hill Formula | Chemical Formula | Molar Mass | Grade Value |
|---|
| 65-85-0 | 200-618-2 | C₇H₆O₂ | C₆H₅COOH | 122.12 g/mol | Ph Eur,BP,USP,E 210 |
Add To My Favorites
Product has been Added to My Favorites
OKPricing & Availability
An invalid quantity was specified. The product quantity has been adjusted.
Add To CartThe quantity field is empty. Please enter a quantity of 1 or more to add items to your cart.
| Description |
|---|
| Catalogue Number | 100130 |
| Synonyms | Phenylformic acid, Benzene carboxylic acid |
| Overview | Disclaimer:The product is not intended for use as a biocide under global biocide regulations, including but not limited to US EPA's Federal Insecticide Fungicide and Rodenticide Act, European Biocidal Products Regulation, Canada’s Pest Management Regulatory Agency, Turkey’s Biocidal Products Regulation, Korea’s Consumer Chemical Products and Biocide Safety Management Act (K-BPR) and others. |
| Product Information |
|---|
| CAS number | 65-85-0 |
| EC index number | 607-705-00-8 |
| EC number | 200-618-2 |
| Grade | Ph Eur,BP,USP,E 210 |
| Hill Formula | C₇H₆O₂ |
| Chemical formula | C₆H₅COOH |
| Molar Mass | 122.12 g/mol |
| HS Code | 2916 31 10 |
| Structure formula Image |
| Quality Level | MQ500 |
| Physicochemical Information |
|---|
| Boiling point | 249 °C (1013 hPa) |
| Density | 1.26 g/cm3 (15 °C) |
| Ignition temperature | 570 °C |
| Melting Point | 122.4 °C |
| pH value | 2.8 (H₂O, 25 °C) (saturated solution) |
| Vapor pressure | 0.001 hPa (20 °C) |
| Bulk density | 500 kg/m3 |
| Solubility | 2.9 g/l |
| Toxicological Information |
|---|
| LD 50 oral | LD50 Rat 1700 mg/kg |
| LD 50 dermal | LD50 Rabbit > 5000 mg/kg |
| Safety Information according to GHS |
|---|
| Hazard Pictogram(s) | |
| Hazard Statement(s) | H315: Causes skin irritation.H318: Causes serious eye damage.H372: Causes damage to organs through prolonged or repeated exposure if inhaled. |
| Precautionary Statement(s) | P260: Do not breathe dust.P264: Wash skin thoroughly after handling.P280: Wear protective gloves/ eye protection/ face protection.P302 + P352: IF ON SKIN: Wash with plenty of water.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P314: Get medical advice/ attention if you feel unwell. |
| Signal Word | Danger |
| RTECS | DG0875000 |
| Storage class | 6.1C Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects |
| WGK | WGK 1 slightly hazardous to water |
| Disposal | 3Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C. |
| Safety Information |
|---|
| Categories of danger | harmful, irritant |
| Storage and Shipping Information |
|---|
| Storage | Store at +15°C to +25°C. |
| Transport Information |
|---|
| Declaration (railroad and road) ADR, RID | Kein Gefahrgut |
| Declaration (transport by air) IATA-DGR | No Dangerous Good |
| Declaration (transport by sea) IMDG-Code | No Dangerous Good |
| Specifications |
|---|
| Assay (acidimetric) | 99.5 - 100.5 % |
| Assay (acidimetric, calc. on anhydrous substance) | 99.5 - 100.5 % |
| Identity | conforms |
| Appearance of solution (5 %; ethanol 96 %) | passes test |
| pH-value (saturated solution) | 2.5 - 3.5 |
| Solidification point (lower value) | ≥ 121 °C |
| Solidification point (upper value) | ≤ 123 °C |
| Sulfate (SO₄) | ≤ 0.02 % |
| As (Arsenic) | ≤ 1 ppm |
| Cd (Cadmium) | ≤ 10 ppm |
| Hg (Mercury) | ≤ 1 ppm |
| Pb (Lead) | ≤ 2 ppm |
| Halogenated compounds (as Cl) | ≤ 0.01 % |
| Toluene (HS-GC) | ≤ 890 ppm |
| Other residual solvents (ICH Q3C) | excluded by the production prozess |
| Oxidizable matter (Ph Eur) | passes test |
| Oxidizable matter (USP) | passes test |
| Readily carbonisable substance | passes test |
| Water | ≤ 0.5 % |
| Sulfated ash | ≤ 0.05 % |
| Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).Conforms to the purity criteria on food additives according to the current European Commission Regulation. |
| Corresponds to Ph Eur, BP, USP, E 210 |
| Readily carbonisable substance | passes test |
| Water | ≤ 0.5 % |
| Sulfated ash | ≤ 0.05 % |
| Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).Conforms to the purity criteria on food additives according to the current European Commission Regulation. |
| Corresponds to Ph Eur, BP, USP, E 210 |
